KegFitFinder guides
Practical guides to measuring, sizing and choosing the right part, from the same sourced data behind the fitment tool.
Identify your keg coupler: Sanke D, S, A, G and USanke couplers come in incompatible types (D, S, A, G, M, U). Match the coupler to the kegBall-lock vs pin-lock Cornelius keg postsBall-lock and pin-lock Cornelius posts use different disconnects and cannot be crossed. HeCO2 vs nitrogen cylinder connections: CGA-320 vs CGA-580CGA-320 is CO2, CGA-580 is nitrogen and beer gas. They do not interchange, and forcing theFlare vs push-in vs barb: choosing a gas or liquid connectionMFL flare, Duotight push-in and barbed tails each seal differently. Pick by tubing type anCornelius post threads and the 19/32 vs 9/16 trapTwo Cornelius post threads look identical but differ: 19/32-18 vs 9/16-18. Buy universal pDuotight vs John Guest push-fit sizingDuotight is sized to tube OD (8mm, 9.5mm, 6.5mm) for EVABarrier. John Guest 5/16 inch is aConnecting a UK keg or shank to a Cornelius setup (BSP)UK draft gear uses 5/8 inch BSP beer nuts that seal on a washer. Here is how to bridge itWhy a flare fitting leaks and how to seal itFlare fittings seal on the cone face, not the thread. PTFE tape, a scored face or an over-